Electric Gate Repair in Chandler, AZ

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Electric Gate Repair in Chandler, AZ

Electric gate repair in Chandler typically costs between $180 and $450, depending on whether the issue stems from a faulty control board, a misaligned photo-eye, or a worn-out drive gear. At Vance Gate Repair, we provide a written price before any work begins, ensuring you know exactly what the repair entails before we turn a single screw. If your gate is stuck open, won’t respond to your remote, or has started making a grinding noise, call us at (520) 827-3159 for a free estimate and professional assessment.

We approach every service call with the same technical discipline Adrian Vance established in 2014. Whether you are dealing with a standard residential swing gate or a complex commercial slide gate, we operate under The Haven Standard. This means you receive a written scope of work, a clear price, and a documented photo record of the findings once we finish. We specialize in nine major automation brands, including FAAC, BFT, and Viking, allowing us to service the hardware already on your property rather than pushing for unnecessary replacements. For broader gate issues, you can always visit our main Gate Repair in Chandler page to see how we handle non-electric components.

When You Need Electric Gate Repair

Chandler’s unique climate, characterized by intense summer heat and dry desert conditions, places specific stress on gate electronics. Circuit boards and sensors that might last a decade in coastal climates often face premature failure here due to thermal expansion and dust accumulation in the housing. You should contact us for an inspection if you notice these signs:

• The gate fails to reverse when an object is in the path: This usually indicates a misalignment in the photo-eye, which is the infrared beam that stops the gate. This is a significant safety hazard that requires immediate recalibration.
• The motor hums but the gate does not move: This is a common symptom of a stripped drive gear or a failing capacitor. We often see this in older units where internal grease has dried out due to the Arizona heat.
• Intermittent remote response: If you have to stand within five feet of the gate to get it to open, the issue is often a degraded antenna or radio frequency interference. We test signal strength and receiver sensitivity to isolate the cause.
• The gate stops mid-travel: This often points to a limit switch adjustment or a high-current load on the motor. We check the physical limit switches and the current sensor settings to ensure the gate isn’t hitting an obstruction or binding against the track.
• Grinding or metal-on-metal sounds: These noises almost always indicate a mechanical failure within the gearbox. Ignoring this sound often leads to motor burnout, which is significantly more expensive to repair than replacing the internal gear assembly.

If you are experiencing any of these issues, it is safer to keep the gate in manual mode until a technician can assess the system. High-tension components and electrical motors carry real risks; please avoid attempting to bypass safety sensors or disassemble the motor housing yourself.

Our Electric Gate Repair Process

We follow a strict, documented procedure for every service call. Under Clause 4 of The Haven Standard, we provide photographic evidence of every adjustment made. This ensures you have a permanent record of your gate’s health, which is invaluable for future maintenance or home resale.

1. Initial Assessment and Safety Check: We first verify that the gate is safe to operate. We check the physical gate structure, the hinges, and the safety sensors to ensure there is no immediate risk of injury or property damage.
2. Diagnostic Testing: We use a multimeter to check the voltage supply at the control board and the motor. We test the input signals from your remotes, keypads, and exit loops to determine exactly where the communication break is occurring.
3. Written Scope and Pricing: Before we touch a tool, we hand you a written quote. This price includes the labor and the parts needed to fix the issue. We do not charge for “surprises” discovered mid-repair; if the scope changes, we stop, explain why, and get your approval on a new written quote.
4. The Repair and Documentation: We perform the repair using manufacturer-specific parts. Once finished, we take photos of the settings, the wiring, and the replaced components. We show you the final state of the repair, ensuring you understand what was changed.
5. Verification and Hand-off: We test the gate through at least five full cycles. We then provide you with the photo log and the final invoice. You are protected by our 365-Day Done Right Promise, which covers the labor and parts on that specific repair for a full year.

Before

After

Electric Gate Repair Pricing in Chandler

How Much Does Gate Repair Cost? (2026 Price Guide) - Chandler, AZ: pricing varies based on the nature of the mechanical or electrical failure. We believe in total transparency, which is why we offer upfront, written pricing before any work begins. Most repairs fall into the following categories:

The final cost depends on the specific brand of your operator-such as Linear or Ghost Controls-and the availability of the required components. We do not inflate prices based on the brand name; we charge based on the labor time and the cost of the hardware. If you have received a quote from another company, we are happy to provide a free second opinion. Just have the paperwork ready when we arrive, and we will review it to ensure you are getting a fair deal. Call us at (520) 827-3159 to discuss your specific gate model and get a clear estimate.

FAQs - Electric Gate Repair

Is it cheaper to repair or replace my electric gate motor?

In most cases, repairing the existing motor is more cost-effective, especially with premium brands like FAAC or BFT. We only recommend replacement if the motor housing is compromised, the internal gearbox is completely seized, or parts are no longer manufactured for your specific model. Call (520) 827-3159 and we can evaluate the condition of your current unit to give you an honest recommendation based on the remaining service life.

Can you fix my gate today?

We provide 24/7 live answering, and we prioritize urgent repairs that affect the security of your property. While we cannot guarantee a specific arrival time without first speaking with you, our dispatch team works to get a technician to your location as quickly as possible. Please call us at (520) 827-3159 to check our current schedule for Gate Repair Near Me in Chandler, AZ.

Do you work on all gate automation brands?

We service nine major automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because Adrian Vance built his expertise in commercial access control, we are comfortable working on almost any residential motor system currently on the market. If you have an older or obscure brand, let us know when you call, and we will check our parts inventory before we arrive.

What does the “365-Day Done Right Promise” cover?

Our 365-Day Done Right Promise covers the labor and parts for any repair we complete for one full year. If the issue returns or if our repair does not function as intended, we will return to fix it at no additional charge to you. This is our commitment to quality and accountability on every job we undertake.

If you are ready to get your gate working properly, we are ready to help. Our technicians are background-checked, uniformed, and prepared to document every step of the repair process. Call us at (520) 827-3159 for a free estimate and to schedule your service.

Written by Adrian Vance, Owner at Vance Gate Repair Chandler, serving Chandler.