Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Tempe, AZ
Gate access control repair in Tempe typically costs $280-$650 for keypad or card-reader issues and $340-$780 for video intercom or phone-entry problems, with most calls completed same-day. Tempe’s dense student-rental corridors along Apache Boulevard and University Drive push commercial-grade operators far past residential duty cycles, so we quote commercial-rated hardware for any ASU-adjacent property. Call (520) 827-3159 and a live person will pick up, 24 hours a day.
Why Tempe Homes Are Different
Tempe’s housing core is 1950s-1980s ranch homes and low-rise apartment blocks built for ASU enrollment growth, most retrofitted with wrought-iron or tubular-steel gates as neighborhoods densified. Property managers on high-turnover student rentals defer maintenance until full failure, so we find stripped worm gears, corroded control boards, and seized hinges rather than simple adjustments.
Sustained summer highs above 110°F thermally expand steel frames enough to bind slide gates and jam swing-gate latches, peaking in June-July. Then Maricopa County’s July-September haboob season drives ultra-fine dust and caliche into operator motors, circuit boards, and photo-eye sensors, producing a reliable second wave of calls every August and September. A busy student-complex gate on Apache Boulevard can cycle 400-600 times daily during the school year; we quote commercial-duty operators rated for 1,000+ cycles per day, because a residential-grade unit installed there will be back for replacement inside 18 months.
Our Main Tempe Services
Most calls we field from Tempe involve these three services:
Gate Repair in Tempe
We repair swing and slide gates on ranch homes near Kiwanis Park and aging apartment complexes along Rural Road. Tempe’s deferred-maintenance pattern means we replace more seized hinges and stripped gears than we adjust. Every repair leaves a photographed record of what was found and what was fixed, under Haven Standard Clause 4. Gate Repair in Tempe
Gate Installation in Tempe
New gate installation in Tempe accounts for thermal expansion, dust intrusion, and the heavier-duty hardware needed near campus. We measure, quote in writing, and schedule - no same-day installation, but a free measure and written price before any work is ordered. Gate Installation in Tempe
Gate Motor & Opener in Tempe
Gate motor service covers operator burnout on high-cycle student-housing gates and residential opener failures after dust storms. We service nine automation brands and stock common parts locally. Gate Motor & Opener in Tempe
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Tempe
Gate access control in Tempe means managing entry for properties that cycle far more than their hardware was designed for. Student-rental complexes near ASU log 400-600 daily open/close events during semester, burning through residential-grade keypads and card readers in under two years. We install commercial-rated access hardware and document every wire termination and programming step so the next technician isn’t starting from scratch. Gate Access Control covers our full scope.
Keypad Entry
Signs you need it
Buttons stick or fail to register, the housing is cracked from sun damage, or codes work intermittently after monsoon moisture intrusion.
What it costs in Tempe
Keypad repair runs $180-$340; commercial-grade keypad replacement with weather-sealed housing runs $280-$520.
How we do it
We test voltage at the keypad terminal, photograph the wiring configuration, replace or reseal the unit, and program new codes with the property manager present.
Card Reader
Signs you need it
Cards scan only after multiple attempts, the reader LED flashes error codes, or the system fails to log entry times to the access database.
What it costs in Tempe
Card reader repair is $220-$380; proximity or HID reader replacement with controller reprogramming runs $340-$580.
How we do it
We clean the reader head, test signal strength at the controller, replace the unit if read range is below spec, and verify database logging before leaving.
What Gate Access Control Costs in Tempe
| Item | Typical range in Tempe |
|---|---|
| Keypad repair | $180 - $340 |
| Keypad replacement (commercial) | $280 - $520 |
| Card reader repair | $220 - $380 |
| Card reader replacement | $340 - $580 |
How long does access control repair take in Tempe?
Most keypad and card reader repairs are completed in 1-2 hours during a single visit. Complex wiring faults or controller replacement may require a return visit with parts. Call (520) 827-3159 for scheduling - estimates are free.
Do you program new tenant codes for student rentals?
Yes, we program and delete codes at the keypad or controller level, and we document the active code list in the job record for property manager reference. We do not store codes ourselves; the log belongs to the property owner.
Gate Parts & Welding in Tempe
Gate parts and welding in Tempe addresses the structural failures that follow years of deferred maintenance on 1970s-1990s wrought-iron and tubular-steel gates. Thermal expansion, dust-driven corrosion, and high-cycle stress crack welds and oval out hinge pins. We cut out the damaged section, match the steel grade, and leave a photographed weld record. Gate Parts & Welding covers our full scope.
Hinge Replacement
Signs you need it
The gate sags, binds at the latch, or the hinge pin rattles loose in an elongated barrel.
What it costs in Tempe
Hinge replacement with j-bolt or barrel hinge runs $140-$280 per hinge, including removal of the seized pin and realignment.
How we do it
We support the gate with a jack, cut out the worn hinge, weld or bolt in the replacement, and grease the assembly before photographing the fit.
Custom Welding
Signs you need it
Cracks appear at weld joints, pickets are broken or missing, or the frame has bent from vehicle impact or thermal stress.
What it costs in Tempe
On-site custom welding for crack repair or picket replacement runs $180-$360; frame straightening or section replacement runs $280-$520.
How we do it
We grind out the cracked weld, match the steel alloy, lay the new bead, and leave a photo of the repair and the rod specification used.
What Gate Parts & Welding Costs in Tempe
| Item | Typical range in Tempe |
|---|---|
| Hinge replacement (per hinge) | $140 - $280 |
| Custom welding, crack/picket repair | $180 - $360 |
| Frame straightening or section replacement | $280 - $520 |
Can you weld aluminum gates in Tempe?
Yes, we TIG-weld aluminum frames and extrusions, though most Tempe gates are steel or iron. We match filler alloy and document the rod specification in the job record.
Do you replace gate rollers on sliding gates?
Yes, we replace v-groove and box-track rollers, realign the carrier, and test load distribution. Roller replacement runs $160-$300 per assembly in Tempe. Call (520) 827-3159 for an exact quote.
Brands We Service in Tempe
We stock parts and service nine automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Common FAAC, BFT, and Linear control boards and gearboxes are carried on our Tempe-area trucks, so most brand-specific repairs don’t wait for parts orders. our brands
Pricing for Gate Repair in Tempe, AZ
| Service | Typical range in Tempe |
|---|---|
| Keypad repair | $180 - $340 |
| Keypad replacement (commercial) | $280 - $520 |
| Card reader repair | $220 - $380 |
| Card reader replacement | $340 - $580 |
| Hinge replacement (per hinge) | $140 - $280 |
| Custom welding, crack/picket repair | $180 - $360 |
| Frame straightening or section replacement | $280 - $520 |
| Roller replacement (per assembly) | $160 - $300 |
In Tempe, prices push higher when we find corrosion damage hidden inside a hinge barrel or when a student-complex gate requires commercial-duty hardware instead of residential-grade. Under Haven Standard Clause 1, every price is written and handed to you before any work starts - no invoice surprises.
Neighborhoods We Serve in Tempe
We dispatch to properties throughout Tempe from our Phoenix office, with crews typically on-site within the same day for repair calls. Areas we serve include:
- Downtown Tempe / ASU campus corridor
- North Tempe / Papago Buttes area
- Kiwanis Park and Broadmor neighborhoods
- Apache Boulevard corridor (student rentals)
- Rural Road and University Drive corridor
Service Area - Cities Near Tempe
We serve residential and light commercial gate customers across the Phoenix metro. Crews are regularly dispatched to Mesa, AZ, Chandler, AZ, Gilbert, AZ, and Scottsdale, AZ from our Phoenix coordination office. Scheduling and parts stocking are centralized; a live person answers calls for all service areas 24 hours a day.
Serving Tempe, AZ - Our Local Coverage Area
We’re based in the Tempe area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Tempe
Most repair calls in Tempe are scheduled same-day, with emergency dispatch available 24 hours a day. A live person answers the phone at (520) 827-3159; no voicemail or callback queue.
Most Tempe HOAs require architectural review for new gate installation but not for like-kind repair or access control component replacement. We document the existing configuration photographically to prove like-kind status if the HOA asks.
Yes, student-rental complexes along Apache Boulevard, University Drive, and Rural Road are a significant share of our Tempe work. We quote commercial-duty operators rated for 1,000+ daily cycles on these properties.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tempe Customers Say
"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B.